Viewsonic PJ510 Manual De Usuario

Press the SEARCH button

Cycles through input signals, displaying the images of retrieved signals. If no signal is found, it 

returns to the signal that was selected before the search was initialized.

• May not function properly with some input signals.
• The signal searching function takes about 10 seconds to display an image.

Press the ASPECT button

At RGB input, selecting an aspect ratio may display the message “SYNC IS OUT OF 

RANGE”. In this case, please select one of other aspect ratios.

At a COMPONENT VIDEO input of 16:9 Hi-Vision of 1125i (1035i/1080i)/750p. only 16:9 

can be selected.

When the 4:3 is selected under the SCREEN TYPE item of the OPTION menu, WIDE and 

ZOOM cannot be selected.

Press the BLANK button

The input signal screen is shut off, and a blank screen appears. You can set the blank screen using 

the menu (from the SCREEN menu, select BLANK). 
Press the BLANK button again to remove the blank screen, and return to 

the input signal screen.

The temporary blank  function will automatically finish if any button of the projectior is pressed, if 

there is a change in the input signal's state and or if the following functions are pressed on the remote 

control. (STANBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, VOLUME, MUTE, POSITION 

OR MENU button.)