Viewsonic PJ510 Manual De Usuario

With the MAIN menu, the items shown in the Table below can be performed. 
Perform each operation in accordance with the instructions in the table below.

Adjust the Keystone (Vertical) Distortion:
Upper in the data (S)

↔(T) Lower in the data

• The adjustable range of this function will vary with the type of input signal. At some signals, this 

function may not work well.

• When the V:INVERT or the H&V:INVERT is selected under the MIRROR item, if the projector 

screen is inclined or if the projector is angled downward, this function may not work correctly. 

• When the WIDE is selected under the ASPECT item of the MAIN menu, this adjustment is 

ignored.

• When the zoom adjustment is set to the TELE side, this correction may be excessive. This 

function should be used with zoom set to WIDE whenever possible.

Adjust the Brightness:  Light (S)

↔(T) Dark

Adjust the Contrast:  Strong (S)

↔(T) Weak

Select an Aspect Ratio 
At a RGB input:
4:3 (S)

↔(T) 16:9 (S)↔(T) 15:9 (S)↔(T) 32:15

• At a RGB input, selecting an aspect ratio may display the message “SYNC IS OUT OF RANGE”. 

In this case, please select one of other aspect ratios.

At a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input:
4:3 (S)

↔(T) 16:9 (S)↔(T) WIDE (S)↔(T) ZOOM

• At a COMPONENT VIDEO input of 16:9 Hi-Vision of 1125i(1035i/1080i)/750p, only 16:9 can be 

selected.

• When the 4:3 is selected under the SCREEN TYPE item of the OPTION menu, WIDE and 

ZOOM cannot be selected.

Select the Whisper Mode:
NORMAL (S)

↔(T) WHISPER

• When the WHISPER is selected, acoustic noise and screen brightness are reduced.

Select a Mirror Status:
NORMAL(S)

↔(T)H:INVERT (S)↔(T) V:INVERT (S)↔(T) H&V:INVERT

Reset the MAIN Menu Items:
Selecting the EXECUTE performs this function.
EXECUTE (S)

←  CANCEL

• The items of the MAIN menu are collectively returned to the initial setting. Note that the items 

WHISPER and LANGUAGE are not reset