Furuno 711c Manual De Usuario

4.  USER MENU

Speed is normally entered automatically, from your navigator. If the navigator fails, 
manually enter speed.

1. Open the [Parameter Setup] menu.
2. Rotate the Course control knob to select the current setting for [Speed Calcula-

tion] then push the knob.

3. Rotate the Course control knob to select [Auto] or [Manual] then push the knob. 
4. For [Auto] go to step 5. For [Manual], do as follows:

1) Rotate 

the 

Course control knob to select the current value then push the 

knob.

2) Rotate 

the 

Course control knob to set a value then push the knob (setting 

range: 0.1 - 99.0).

5. Press the 

 key three times to close the menu.

For Fantum Feedback

TM

, the amount of helm operation required to move the rudder 

can be adjusted. The higher the setting, the less helm required to move the rudder.

1. Long press the 

 key to open the menu.

2. Rotate the Course control knob to select the current value for [Rudder Drive Lev-

el] then push the knob. 
Note: When the rudder reference unit is installed, [Rudder Drive Level] does not 
appear.

3. Rotate the Course control knob to set a value then push the knob (setting range: 

1 - 20).

4. Press the 

 key to close the menu.