Schneider Electric HRB1684301-01 Manual De Usuario

100

HRB1684301-01

Chapter 10—Alarms

PowerLogic™ PM5500 series user manual

You can use the ION Setup to configure your meter’s LED for alarming.

1. Start ION Setup.

2. Connect to your meter

3. Navigate to I/O configuration > Energy Pulsing.

4. Select Front Panel LED and click Edit. 

5. Set the control mode to Alarm.

6. Click Send to save your changes.

You can set the alarm to trigger a digital output, which you can then use to control an 
external relay. See “Digital output applications” on page 77 for details.

If your meter is equipped with a display, use the front panel buttons to navigate to the 
alarm setup or display screens.

When a low, medium or high priority alarm is tripped, this symbol appears at the top 
right corner of the display screen, indicating that an alarm is active:

 

For high priority alarms, the alarm icon remains displayed until you acknowledge the 
alarm.

If configured for alarming, the alarm / energy pulsing LED also flashes to indicate the 
meter has detected an alarm condition. See “LED alarm indicator” on page 99.

Details about the alarms can be viewed from the active alarms (Active), alarm history 
(Hist), alarm counters (Count) and unacknowledged alarms (Unack) screens.

Maint

Reset

Setup

Comm

Alarm

Meter

Alarm

Hist

Active

Count

Unack