Schneider Electric HRB1684301-01 Manual De Usuario

PowerLogic™ PM5500 series user manual 

Chapter 10—Alarms

HRB1684301-01

99

You can use the meter’s alarm / energy pulsing LED as an alarm indicator.

NOTE: The alarm / energy pulsing LED on the PM5561 is permanently set for energy 
pulsing and cannot be used for alarms.

You can use the meter display to configure the alarm /energy pulsing LED for alarming.

1. Navigate to the LED setup menu screen.

2. Set the mode to Alarm, then press OK.

3. Press   to exit. Press Yes to save your changes.

Alarm / energy pulsing LED

Mode

Disabled, Alarm, Energy

Disabled turns off the LED completely.
Alarm sets the LED for alarm notification.
Energy sets the LED for energy pulsing.

Parameter

Active Del,
Active Rec,
Active Del + Rec,
Reactive Del,
Reactive Del + Rec,
Apparent Del,
Apparent Rec,
Apparent Del + Rec

Select which accumulated energy channel to monitor and 
use for energy pulsing. This setting is ignored when the 
LED mode is set to Alarm.

Pulse Wt. (p/k_h)

1 to 9999999

When configured for energy pulsing, this setting defines 
how many pulses are sent to the LED for every 1 kWh, 
1 kVARh or 1kVAh accumulated energy. This setting is 
ignored when the LED mode is set to Alarm.

Maint

Reset

Setup

LED

D In

D Out

Inp Mtr

Comm

Alarm

I/O

Meter