Schneider Electric HRB1684301-01 Manual De Usuario

38

HRB1684301-01

Chapter 3—Front panel display and meter setup

PowerLogic™ PM5500 series user manual

•

See “Meter configuration using ION Setup” on page 53 to set up the meter using 
ION Setup.

Demand is a measure of average consumption over a fixed time interval.

Use the Demand setup screens to define power demand, current demand or input 
metering demand.

1. Navigate to Maint > Setup.

2. Enter the setup password (default is “0”), then press OK.

3. Navigate to Meter > Dmd.

4. Move the cursor to select Power Demand, Current Demand or Input Demand.

5. Move the cursor to point to the parameter you want to modify, then press Edit.

6. Modify the parameter as required, then press OK.

7. Move the cursor to point to the next parameter you want to modify, press Edit, 

make your changes, then press OK.

8. Press Yes to save your changes.

Method

Timed Sliding Block 
Timed Block
Timed Rolling Block
Input Sync Block
Input Sync Roll Block
Cmd Sync Block
Cmd Sync Roll Block
Clock Sync Block
Clock Sync Roll Block
Thermal

See “Power demand” on page 115 for 
details.

Interval

0 - 99

Set the demand interval, in minutes.

Subinterval

0 - 99

Applies only to rolling block methods.
Define how many subintervals the demand 
interval should be equally divided into.

Select Dig Output

None, Digital Output D1, Digital 
Output D2

Select which digital output the end of 
demand interval pulse should be sent to.

Select Dig Input

None, Digital Input S1, Digital 
Input S2, Digital Input S3, Digital 
Input S4

Applies only to input sync methods.
Select which digital input is used to sync 
the demand.

Clock Sync Time

0 - 2359

Applies only to clock sync methods (these 
synchronize the demand interval to the 
meter’s internal clock).
Define what time of day you want to 
synchronize the demand

Maint

Reset

Setup

Basic

Adv

Dmd

Tariff

Meter