Schneider Electric PM5300 Manual De Usuario

PowerLogic™  PM5300 series user guide 

Chapter 6—Input / Output

© 2014 Schneider Electric All Rights Reserved

61

You can use the ION Setup to configure your meter’s LED or digital output for energy 
pulsing.

1. Start ION Setup.

2. Connect to your meter

3. Navigate to I/O configuration > Energy Pulsing.

4. Select the LED or a digital output to configure and click Edit. The setup screen is 

displayed.

5. Enter a descriptive name for the digital output’s Label.

6. Configure the other setup parameters as required.

7. Click Send to save your changes.

•

See “Alarm Priorities” on page 66 for a detailed description on the alarm / energy 
pulsing LED’s behavior when it is configured for alarm notification.

You can use the front panel display to configure your meter’s LED for alarming or 
energy pulsing application.

1. Navigate to Maint > Setup.

2. Enter the setup password (default is “0”), then press OK.

3. Navigate to I/O > LED.

Mode

Off, Alarm, Energy

Off disables the LED.
Alarm sets the LED for alarm notification.
Energy sets the LED for energy pulsing.

Pulse Wt. (p/k_h)

1 to 9999999

When configured for energy pulsing, this 
defines how many pulses are sent to the LED 
for every 1 kWh, 1 kVARh or 1kVAh of 
accumulated energy.

Channel

Active Energy Delivered

Select which accumulated energy channel to 
monitor and use for energy pulsing.

Active Energy Received

Active Energy Del+Rec

Reactive Energy Delivered

Reactive Energy Received

Reactive Energy Del+Rec

Apparent Energy Delivered

Apparent Energy Received

Apparent Energy Del+Rec

Maint

Reset

Setup

Meter

Comm

Alarm

HMI

Clock

LED

Relay

I/O

D Out

S In