U-Line Refrigerator/Ice-Maker Combos Manual De Usuario

8.  Allow at least 1-1/2 inches clearance behind the unit for electri-

cal and water supply connections.

It is important that the unit, primarily the ice maker assembly, is level.
All 75 and 15 Series units are equipped with adjustable feet for level-
ing and height adjustment (see Figure 9). All other units have rubber
feet.

1.  With a standard blade screwdriver (or 1/4” nutdriver), remove

the screw needed to attach the grille (see Figure 10).

2.  Remove the control knob by pulling it toward you.

3.  Carefully remove the grille from inside the unit. A small screw hole

is located toward the top of the middle recessed section of the
grille.

UL105

 Users Manual 41923  9/2/03  3:44 PM  Page 9