U-Line Refrigerator/Ice-Maker Combos Manual De Usuario

1.  With a standard blade screwdriver (or 1/4" nutdriver), remove

the screw needed to attach the grille (see Figure 12).

2.  Carefully remove the grille from inside the 

unit. Locate the screw hole at the top, 
middle recessed section of the grille.

3.  Place the two hook-hinges (located on the

rear bottom side of the grille) on the front
lip of the unit base. Swing the grille up into
position, aligning the grille and cabinet
screw holes (see Figure 13).

4.  Insert the screw, being careful not to over tighten.

UL502

UL501

  Users Manual 41923  9/2/03  3:44 PM  Page 11