Bunn P2896 Manual De Usuario

10

1. Open the slide lid.

(CAUTION: Do not place brewer in sink or 

other water source.)

2. Fill the reservoir above 

the minimum line, up to 

the  maximum line with 

fresh cold water.

3. Close the slide lid.

4. Adjust the volume 

control lever to the  

desired volume.

(NOTE: Minimum volume is approx. 4 oz. 

(118 ml) Maximum is approx. 12 oz. (355 

ml) Settings are in one ounce (30 ml) 

increments.)

5. Place a mug, larger than 

the volume selected, on  

the drip tray grate below  

the pod holder outlet.

6. Press and hold the 

pod holder release 

button while sliding 

the pod holder out.

WARNING: Never place hands directly under pod holder outlet. Hot water can be present.
WARNING: Never remove the holder with force. If stuck, wait 10 minutes and try again.
WARNING: Never brew without the pod holder insert in place.

7. Press a pod into the 

pod holder.

P2941

P2919

P2909

P2902

P2904

P2908

(NOTE: For best results, center pod in 

holder and gently press the pod completely 

into holder cavity.)

8. Insert the loaded pod 

holder into the brewer 

and press all the way 

in to lock holder.

(NOTE: You should hear a clicking sound 

when the pod holder locks in place.)

P2907

9. Press and release 

the Coffee or Tea 

button. To cancel 

a brew, press and 

release the Coffee or 

Tea button.

P2908

10. When brewing has 

stopped, press and hold 

the pod holder release 

button while sliding the 

pod holder out.

11. Dispose of the used pod. 

P2911

P2952

(NOTE: The red BUNN light will come back 

on indicating the brew cycle has finished.)

(NOTE: Use care not to dispose of pod insert.)

(See page 11 for brewing tips) 

P2903