Bunn P2896 Manual De Usuario

9

1. Remove the lid and 

water reservoir.

(CAUTION: Do not place the brewer in a 
sink or other water source.)

8. Place a mug or bowl that will 

hold at least 14 fl. oz. (414 
ml) onto the drip tray grate.

4. Replace the reservoir and 

lid and close the slide lid.

9. Press and release 

the coffee brew 
button to fill the 
internal  water tank.

5. To ensure the Pod Holder  

is locked in place, use 
thumb to press the pod 
holder release button to 
eject the holder and then 
press all the way in to 

(CAUTION: Water may not immediately flow 
from the brewer. Never remove pod holder 
from brewer during a brew cycle.)

(CAUTION: You should hear a clicking sound 
when the pod holder locks in place.)

6. Slide the volume 

control lever to the 
maximum setting.

7. Plug in the brewer 

and turn on the 
power switch.

11. Press and release  

the coffee brew  
button a second 
time.

(CAUTION: Water should flow from the pod 
holder. Wait until water drip out has finished 
before removing the pod holder.)

P2901

P2904

P2903

P2907

P2907

P2952

P0214/2905

(NOTE: Wait for Heating Indicator to go out 

before proceeding to Step #11)

You are now finished preparing the brewer 
for it’s first use. Proceed to the “Brewing 
Delicious Coffee Or Tea” section.

2. Thoroughly rinse the water reservoir.

3. Fill the reservoir to the 

maximum line with 

    fresh cold water.

P3017

10. Empty any water in the mug or bowl and  

place the mug back on the drip tray grate.

P2908