Bunn P2896 Manual De Usuario

16

The Initial Brewer Set-up procedure must be 

performed first. Please follow the directions 

on page 9 before attempting to run a brew 

cycle.

Check to make sure the brewer is plugged 

in and the POWER SWITCH has been turned 

on. (The POD HOLDER RELEASE BUTTON 

- also known as the BUNN Indicator - will 

be illuminating red, indicating power to the 

brewer.) 

The HEATING INDICATOR is lit. 

Wait until the indicator goes off before 

pressing one of the brew buttons. The 

brewer will not start a brew cycle until the 

water in the internal tank is heated to the 

proper temperature.

Check to make sure the POD HOLDER is 

inserted into the brewer.
If the POD HOLDER is inserted into the 

brewer, carefully remove and replace the 

POD HOLDER to ensure the POD HOLDER is 

locked in place.
Listen for a clicking sound. The click 

indicates that the holder has locked into 

place.

The REFILL WATER INDICATOR is lit.

The reservoir has run low on water and 

needs to be filled above the minimum mark 

indicated on the side of the reservoir.