Bunn P2896 Manual De Usuario

18

TROUBLESHOOTING (Cont.)

SITUATION

EXPLANATION

The Pod Holder will not come

out of the brewer.

Water is appearing on the

counter around the base of the

brewer.

Water leaks out around the

sprayhead.

The pod in the POD HOLDER may have swelled

to a point where the holder does not slide out

easily.

Wait at least 10 minutes and then try

carefully removing the pod holder again.

CAUTION: Hot liquid may be present.

The WATER RESERVOIR has been removed

to be ﬁlled with water and was not seated

properly when it was replaced.

Remove the lid from the top of the brewer.

With ﬁrm, but not forceful pressure, press

down on both sides of the reservoir to

ensure that the seal in the bottom of the

reservoir seats properly. Replace the lid and

watch for additional water around the base

of the brewer. If a problem persists, contact

Customer Service. (Refer to page 20 or 22

for customer assistance.)

Replace a damaged seal or tighten a loose

sprayhead.

Refer to “Assembling The Sprayhead/Seal”

& “Inspecting The Sprayhead/Seal” sections

for detailed information on how to resolve

sprayhead leaks.

CAUTION: Wait for hot liquid to cool.