Bunn RL00006929 Manual De Usuario

Page 11

Spitting or unusual steaming from 

sprayhead.

Warmer plates too hot, solenoid 

coil smoking, or water in tank heats 

excessively fast.

Inconsistent beverage level in de-

canter.

Dripping from sprayhead.

1. Control Thermostat

2. Lime build-up

Tank and tank components should 

be delimed regularly depending on 

local water conditions.  Excessive 

mineral build-up on stainless steel 

surfaces can initiate corrosive reac-

tions resulting in serious leaks.

1. Brewer wired to wrong voltage

1. Improper water pressure

2. Syphon system

1. Syphon system

2. Solenoid Valve

Refer to Service - Control Thermo-

stat for testing procedures.  See 

page 13.

Inspect the tank assembly for ex-

cessive lime deposits.  Delime as 

required.

Refer to Electrical Requirements - 

Page 4.

Check the operating water pressure 

to the brewer.  It must be between 

20 and 90 psi.

Water should flow freely from the 

sprayhead  and then stop abruptly.  

The brewer must be level from front-

to-back to syphon properly.

Water should flow freely from the 

sprayhead and then stop abruptly.  

The brewer must be level from front-

to-back to syphon properly.

Refer to Service - Solenoid Valve for 

testing procedures.  See page 20.

32430 121699