Cornelius UF-1 Manual De Usuario

UF-1 and UFB-1 Valves Training Manual

- 10 -

5. Remove valve from mounting

block by pushing locking tab to left
and push down on top plate of
block. .

6. Remove water screw and lever (if it is installed

on the valve).

7. Remove nozzle – turn left ¼ turn.

8. Remove diffuser assembly.

Note: The diffuser must be cleaned daily. Do not use bleach,
do not use detergent, do not put in dishwasher. Use lukewarm
water or soak in carbonated water.

9. Remove bottom plate by disengaging side tabs.

10. Remove U-shaped retainer wire from back of valve.

11. Grasp flow control module assembly and pull

up.
Note: O-rings on bottom of inlets and outlets.

Locking tab

Mounting

screw

Water

lever

Tabs

Retainer

wire

O-rings