Genie 3024 Manual De Usuario

©2010  The Genie Company 

01/27/2010

22

Speed settings are pre-programmed at the factory 
for the maximum speed.  Speed settings should not 
need adjustment with this unit.
However, travel speed for the opener can be 
adjusted to slower speeds to minimize normal wear 
for heavy sectional doors.

NOTE: One piece doors are automatically set during 
Limits programming to the slowest speed and 
opener speed cannot be reset for one piece doors.

Use this guide to ADJUST power head SPEED settings.

There are three (3) Speed settings available on this 
unit.  Door type (one piece or sectional), door weight 
and balance, and condition of door components / 
track affect door speed.  Speed adjustment may not 
be available for some installations depending on 
these factors.

1. Press 

PROGRAM

SET

 on the power head and hold till both 

lights turn steady ON.  Release button.  
Lights go out and Round BLUE light comes ON.

2. Press   two times and the Round BLUE and Long 

BLUE lights come ON.

3. Press 

PROGRAM

SET

 once to enter the Speed Programming 

menu.  The current Speed setting will display on 
the LEDs.  See table below.

4. Press   to raise or   to lower UP Speed settings 

within the available range.  
NOTE: Faster door speeds may not be available.

5. Press 

PROGRAM

SET

 to set UP Speed level.

6. Press   to raise or   to lower DOWN Speed 

settings within the available range.   
NOTE: Faster door speeds may not be available.

7. Press 

PROGRAM

SET

 to set DOWN Speed level and to exit 

Speed menu.  Both LEDs flash BLUE to confirm.

Default LED display is the current Speed setting

LED Speed indicator colors

Red 

    Red

Purple 

    Purple

Blue 

    Blue 

Speed Level LED indicator colors

MAXIMUM

Red

ON

 

Red

ON

MID

Purple

ON

 

 

Purple

ON

SLOW

Blue

ON

 

 

Blue

ON