SMART Technologies 4000I Manual De Usuario

9

You can install the laptop shelf on either side of the cabinet. You should install the shelf before 
you install the computer, because it’s easier to remove the plastic hole covers when the 
computer is not inside the cabinet. If you install the shelf on the right-hand side (when you face 
the interactive whiteboard), take care not to knock the infrared (IR) receiver that’s installed on 
the lower corner of the screen.

You can also attach the J-hook to the handle recess so you can route the umbilical cables 
through this hook to the guest laptop shelf. You’ll find this hook in the accessory kit. 

1. Locate the two laptop shelf keyholes and the single thumbscrew hole on the side of 

the cabinet. Remove the plastic hole covers.

2. Push the two protruding bolts on the edge of the shelf into the two keyholes, and then 

push the shelf firmly down.

3. Push the captive thumbscrew at the bottom of the shelf into the thumbscrew hole and 

tighten.