SMART Technologies 4000I Manual De Usuario

11

1. Choose the side on which you want to mount the shelf. Also select which of the three 

height options you want to use.

2. Using the hex-head screwdriver that comes with your videoconferencing shelf kit, 

remove the three 1/4-20 x 1/2" fasteners as shown. Note that one of these fasteners is 
a safety screw.

3. Remove the caps and plug from the mounting arm at the location where you want to 

mount the shelf. Feed the cables for the videoconferencing camera through the large 
hole, down the channel and out through the lower mounting point.

Do not move the cabinet until you replace the safety screw (step 6).