Mustek SD100 Manual De Usuario

 

security device as drawn left with functions described in the table next page. The 

function for enabling each track of course comes in effect only when the track is 

physically available. 

The default status of JP1 for normal ISO reader delivery is: pin pairs 1-

2, 3-4 and 5-6 short while all the rest kept open. 

1 – 2 

Track 1 

Enabled 

Disabled 

3 – 4 

Track 2 

Enabled 

Disabled 

5 – 6 

Track 3 

Enabled 

Disabled 

7 – 8 

MSR Type 

JIS II 

ISO 

9 – 10 

Reserved 

N.A. 

N.A. 

11 - 12 

Leading / Stop Code 

Disabled 

Enabled 

For ISO MSR in KP100 or KB4000, please find in the CD ROM attached 

to the system for the product KP100 or KB4000 under subdirectory drivers and 

then Jiva (TP series) or TM4000 etc. according to what the host system is and 

then look for KP100 (usually referred to as KBM) for installation of the program 

controlling the keypad. Please in the controlling program after installation enter 

the configuration of the keypad and then access the configuration for the MSR. 

The features controllable in this program are the same as that for SD100 by 

jumper setting. 

For the special type MSR in SD100, please find the subdirectory MSR 

instead of SD100 in the CD ROM attached to the system that SD100 is to be 

applied to for installation of a Posiflex MSR Manager for user to determine 

some parameters in reader output. Please always make sure that the system 

supports the MSR connector before finding the MSR subdirectory in CD ROM. 

The keypad in KB4000 or KP100 is organized into 2 parts: a 4 by 4 

numerical keypad area and a 4 by 6 programmable keypad area. However, this 

keypad allows some layout alterations by the system integrator. Besides the 

standard single key installed, there are double keys and blank keys for purchase 

to provide more convenient interface with the user. 

KB4000 Series User’s Manual 

3 - 3