Mustek SD100 Manual De Usuario

 

The smart card reader device driver has to be installed before this device 

can be accessed by the application software. Please find the device driver from 

the Posiflex Product Information CD ROM that comes alone with KB4000 or 

the Jiva or TM4000 series that KP100 or SD100 is to be applied to. Please visit 

our web site (http://www.posiflex.com.tw) for latest updates of such drivers.  

The finger print sensor is connected to the system through USB interface. 

The operating system must be capable to handle the USB interface to have this 

device working. Starting the computer with the USB interface for this device 

connected or inserting the USB interface of this device with the computer 

running will activate the “Add New Hardware Wizard”. Follow the wizard and 

find in the above mentioned CD ROM under subdirectory drivers and then 

KB4000 or the main product KP100 or SD100 is applied to and then the 

subdirectory for the finger print scanner when required. 

The Posiflex finger print sensor has been tested to operate well on 

reading finger prints of various skin conditions, it is still advisable to keep the 

scanning area clean. To have a successful scanning, the finger must be placed in 

a way that the core of the finger print is within the scanning area, the finger 

should align with the sensing pad within a tolerance of +/- 15º and the finger 

must get in touch with the drive ring around the scanning area. Place the finger 

down flat, lightly but firmly on the sensor. Do not roll the finger as you might in 

a traditional ink-and-paper finger print taking. Keep the finger flat and 

motionless against the sensor detection surface for a couple of seconds during 

the imaging process. Although the finger print patterns vary widely from type to 

KB4000 Series User’s Manual 

3 - 1