SMC Networks 10/100 Manual De Usuario
C
ONFIGURING
THE
S
WITCH
2-34
Web – Click Port, Port Configuration or Trunk Configuration.
Modify the required interface settings, and click Apply.
Modify the required interface settings, and click Apply.
CLI – Select the interface, and then enter the required settings.
Setting Broadcast Storm Thresholds
Broadcast storms may occur when a device on your network is
malfunctioning, or if application programs are not well designed
or properly configured. If there is too much broadcast traffic on
your network, performance can be severely degraded or
everything can come to complete halt.
malfunctioning, or if application programs are not well designed
or properly configured. If there is too much broadcast traffic on
your network, performance can be severely degraded or
everything can come to complete halt.
Console(config)#interface ethernet 1/3
Console(config-if)#description RD SW#13
Console(config-if)#shutdown
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation
Console(config-if)#no shutdown
Console(config-if)#no negotiation
Console(config-if)#speed-duplex 100half
Console(config-if)#flowcontrol
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#
Console(config-if)#capabilities flowcontrol
Console(config-if)#