GarrettCom Magnum 3000 Manual De Usuario

Magnum 3000 Stackable Hubs                                   Installation and User Guide (07/06)

 

 

.

.

into two logical repeaters with separate 

collision domains, while still passing SNMP 

management data through the SRC so that the 

agent can manage both repeaters.  Then, a local 

bridge can be installed between the two 

repeaters using a port from each (for example, 

using a bonus port from each repeater) to 

provide traffic service between the 

repeaters while maintaining full 10Mbps 

bandwidth for the users on each repeater 

stack.            

Figure 2.3.2a:  

cable 

 

 

 

 

 

 

 

 

The same result could also be 

achieved by installing a Magnum 

Bridge Port Module (BPM) into the 

Bonus Port of one of the repeaters and 

connecting it to a port on the other 

repeater. 

 

In another example, eight 

3024 hubs in a managed stack are 

individually segmented and a switching 

hub is used as the traffic center. 

 

 

for connection to switching hub ports.  

This special configuration provides high bandwidth for the users on each 3024 hub, but 

also provides the efficiency of a single SNMP agent for all of the 3024s.  Note also that 

Magnum 3012 units can be used with the special SRC segmenting cable, mixing with the 

3024 models in configurations as desired.