3com 4500 PWR 26-PORT Manual De Usuario
Centralized MAC Address Authentication Configuration Commands
247
interface-type interface-num | interface-name }
, where
interface-type
specifies the port type,
interface-num
specifies the port number and
interface-name
specifies the port name. For the respective meanings and value
ranges, read the Parameter of the Port Configuration section.
Description
Use the
reset dot1x statistics
command to reset the statistics of 802.1x.
This command can be used to re-perform statistics if the user wants to delete the
former statistics of 802.1x.
former statistics of 802.1x.
When the original statistics are cleared, if no port type or port number is specified,
the global 802.1x statistics of the Switch and 802.1x statistics on all the ports will
be cleared. If the port type and port number are specified, the 802.1x statistics on
the specified port will be cleared.
the global 802.1x statistics of the Switch and 802.1x statistics on all the ports will
be cleared. If the port type and port number are specified, the 802.1x statistics on
the specified port will be cleared.
Related commands:
display dot1x
.
Example
Clear the 802.1x statistics on Ethernet 1/0/2.
<4500>reset dot1x statistics interface ethernet 1/0/2
Centralized MAC
Address
Authentication
Configuration
Commands
Address
Authentication
Configuration
Commands
debugging
mac-authentication
event
Syntax
debugging mac-authentication event
undo debugging mac-authentication event
View
User View
Parameter
None