Cisco Systems 12006 Manual De Usuario

The router accessory kit includes a pair of rack-mount brackets that can be used 
as a temporary aid to bear the weight of the router while it is being positioned in 
the equipment rack and secured. The use of these mounting brackets is optional; 
you can install the router in the rack without using these brackets. These brackets 
can be left in place following router installation. 

You need the following items to install the optional rack-mount brackets:

Number 2 Phillips screwdriver

Tape measure (optional)

Level (optional)

To install the rack-mount brackets, see 

 and follow these steps:

Measure and mark the hole at the same height on both the left and right rack rails.

Mount the right mounting bracket:

Hold the right rack-mount bracket against the right rack rail and align the 
bottom screw hole in the bracket with the marked screw hole on the rail.

Insert a screw through the bottom hole in the bracket and finger tighten the 
screw.

Insert and finger tighten a second screw in the top hole in the bracket.

Follow Step 2

 through Step 2

 to mount the left rack-mount bracket.

Use a level to verify that the tops of the two brackets are level, or use a measuring 
tape to verify that both brackets are the same distance from the tops of both rack 
rails.

Use a screwdriver to tighten all the screws.