SMC Networks SMC6752AL2 Manual De Usuario

3-89

•

Capabilities – Specifies the capabilities to be advertised for a port 
during auto-negotiation. (To access this item on the web, see 
“Configuring Interface Connections” on page 3-48.) The following 
capabilities are supported. 
- 10half - Supports 10 Mbps half-duplex operation 
- 10full - Supports 10 Mbps full-duplex operation 
- 100half - Supports 100 Mbps half-duplex operation 
- 100full - Supports 100 Mbps full-duplex operation 
- 1000full - Supports 1000 Mbps full-duplex operation 
- Sym - Transmits and receives pause frames for flow control
- FC - Supports flow control 

•

Broadcast storm – Shows if broadcast storm control is enabled or 
disabled.

•

Broadcast storm limit – Shows the broadcast storm threshold. 
(64-95232000 octets per second)

•

Flow control – Shows if flow control is enabled or disabled.

•

LACP – Shows if LACP is enabled or disabled.

•

Port Security – Shows if port security is enabled or disabled.

•

Max MAC count – Shows the maximum number of MAC address 
that can be learned by a port. (0 - 1024 addresses)

•

Port security action – Shows the response to take when a security 
violation is detected. (shutdown, trap, trap-and-shutdown, or none)

•

Link Status – Indicates if the link is up or down.

•

Port Operation Status – Provides detailed information on port state. 
(Displayed only when the link is up.)

•

Operation speed-duplex – Shows the current speed and duplex 
mode.

•

Flow control type – Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or none)