SMC Networks SMC6752AL2 Manual De Usuario

3-90

CLI – This example shows the connection status for Port 5.

You can use the Port Configuration or Trunk Configuration page to 
enable/disable an interface, set auto-negotiation and the interface 
capabilities to advertise, or manually fix the speed, duplex mode, and flow 
control.

•

Name – Allows you to label an interface. (Range: 1-64 characters)

•

Admin – Allows you to manually disable an interface. You can disable 
an interface due to abnormal behavior (e.g., excessive collisions), and 
then reenable it after the problem has been resolved. You may also 
disable an interface for security reasons.

•

Speed/Duplex – Allows you to manually set the port speed and 
duplex mode. (i.e., with auto-negotiation disabled)

•

Flow Control – Allows automatic or manual selection of flow control.

Console#show interfaces status ethernet 1/5

Information of Eth 1/5
 Basic information:
  Port type:              100TX
  Mac address:            00-30-f1-47-58-46
 Configuration:
  Name:
  Port admin:             Up
  Speed-duplex:           Auto
  Capabilities:           10half, 10full, 100half, 100full 
  Broadcast storm:        Enabled
  Broadcast storm limit:  32000 octets/second
  Flow control:           Disabled
  Lacp:                   Disabled
  Port security:          Disabled
  Max MAC count:          0
  Port security action:   None
 Current status: 
  Link status:            Down
  Operation speed-duplex: 100full
  Flow control type:      None
Console#