OKI ML8810n Manual De Usuario
5
4. Adjust the position of the paper guides (1) to fit the
print media you are using, then re-lock the levers.
5. Fan and straighten the print media, and place it in the
CSF.
6. Gently move the paper lever to the SET position.
7. Rear Mount Only: Push the stacker back.
Select the Cut Sheet Feeder as the
Default Paper Path
1. Press SEL to place the printer off line.
2. Press MODE repeatedly until you see Front CSF on the
2. Press MODE repeatedly until you see Front CSF on the
second line of the display.
The printer changes paths and returns to the on line
state. F-CSF appears on the display.
Note: To feed a sheet in manually using the
Note: To feed a sheet in manually using the
platform, press SEL, then press MODE repeatedly
until you see MANUAL on the second line of the
display.
until you see MANUAL on the second line of the
display.
Front F6_08a.JPG
fan_paper_F2_10.jpg
Front F6_24.jpg
F6_26 rev.jpg
Rear F6_27.jpg