3com 980-000077/002 Manual De Usuario

C

HAPTER

 2: B

RIDGING

 

AND

 IP

The unit must be assigned a unique name. The unit software relies 
on associating unit names with ISDN numbers and IP addresses for its 
core functionality.

1 Enter 

 

 to display the System Parameters screen. 

2 Type a unique name for the unit in the Unit Name field. It can have 

up to 12 characters but note that the name is case-sensitive. Do not 
include spaces in the unit name.

3 Press [Ctrl]+[E] to submit the new setting and then enter 

A valid, unique port IP address is required for the Ethernet port.

1 Enter 

 

 to display the Port Configuration screen. 

2 Select the 

LAN1

 port using the Arrow keys and enter 

 to display 

the Edit Ethernet Port screen. 

3 Type a valid, unique IP address for the unit in the Port IP Address 

field. Do not type the local network IP address.

4 Press [Ctrl]+[E] to submit the new setting and then enter 

The ISDN network type parameter must be set to the correct ISDN 
service, otherwise connections and data transmission over dial-up 
ISDN links will not be possible. In the U.S.A., an additional customer 
identification number, known as a Service Provider Identification 
Number (SPID) may be required.

1 Enter 

 

 

 to display the ISDN Parameters screen.

2 Toggle the Network Type field, using the Spacebar, to the correct 

ISDN network type as given by the service provider.

3 Press [Ctrl]+[E] to submit the new setting and then enter 

Set up the ISDN numbers table to associate each remote unit name 
with an ISDN number and an IP address. Central site autocalls rely on 

Get_con.bk : BRID_IP.FRM  Page 4  Friday, October 3, 1997  1:49 PM