3com 980-000077/002 Manual De Usuario
Configuring a Remote Unit from the Central Site
4-9
Configure the ISDN Numbers Table on the Central Site Unit
A new entry must be added to the ISDN Numbers table on the central
site unit, giving the name that the remote unit will have once that unit
has been fully configured, and the ISDN number for the unit.
site unit, giving the name that the remote unit will have once that unit
has been fully configured, and the ISDN number for the unit.
1 Enter
CO
IS
NU
to display the ISDN Numbers screen.
2 Enter
ADD
to add a new entry to the numbers table.
3 Type the name assigned to the remote unit in the Name field and the
ISDN number for that unit in the ISDN Number 1 field.
Do not alter the IP Address, IP Mask or IPX Network fields.
Unit names are case-sensitive and must be entered correctly.
Unit names are case-sensitive and must be entered correctly.
4 Press [Ctrl]+[E] to submit the new setting and then enter
SAVE
Establish a Remote Management Session
A manual call must be placed before the configuration of the remote
unit can proceed.
unit can proceed.
1 Enter
CO
IS
NU
to display the ISDN Numbers table.
2 Select the entry for the remote unit using the Arrow keys and enter
CALL
3 Enter
REM
to display the Remote Units screen. Press [Ctrl]+[V] at regular
intervals to refresh the screen, until an entry for
NoName
10.0.0.1
appears.
4 Select the
NoName
10.0.0.1
entry using the Arrow keys and enter
REM
5 The Enter Password screen on the remote unit should be displayed
within 30 seconds.
■
If the Enter Password screen is not displayed, check that the name
and IPX network address for the remote unit have been entered
correctly on the central site unit and that the ISDN line is
connected and working normally at both ends of the link.
and IPX network address for the remote unit have been entered
correctly on the central site unit and that the ISDN line is
connected and working normally at both ends of the link.
6 Enter
PASSWORD
(in upper-case letters) when the Enter Password
screen is displayed.
Get_con.bk : IPX_BRID.FRM Page 9 Friday, October 3, 1997 1:49 PM