3com 980-000077/002 Manual De Usuario
Configuring a Central Site Unit for Routing IPX
5-3
configuration settings and port type and put it in a safe, accessible
place.
place.
If the central site unit is being configured for the first time, or if it is
an entirely new installation, then reset the unit to the factory default
settings.
an entirely new installation, then reset the unit to the factory default
settings.
1 Press the [Return] key.
2 Enter
PASSWORD
(in upper-case letters) when the Enter Password
screen is displayed.
3 Enter
CO
STD
4
Do
you
wish
to
keep
IP
Addresses
and
ISDN
parameters
.
KEEP
(Y/N)?
is displayed at the command line. Enter
N
5
This
will
ERASE
all
configurations
.
ERASE
(Y/N
) is
displayed. Enter
Y
6
System
will
now
reboot
is displayed.
7 Follow the on-screen instructions.
8 Enter
PASSWORD
when the Enter Password screen is displayed.
9 Enter
SAVE
and then enter
QUIT
10 Power-cycle the unit by removing and then refitting the power lead.
11 Follow the on-screen instructions.
12 Enter
PASSWORD
when the Enter Password screen is displayed.
Following the above sequence will ensure that the unit is reset to the
factory default configuration and that the unit database is empty.
factory default configuration and that the unit database is empty.
Assign the Unit Name
The unit must be assigned a unique name. The unit software relies
on associating unit names with ISDN numbers for its core
functionality.
on associating unit names with ISDN numbers for its core
functionality.
1 Enter
CO
SYS
to display the System Parameters screen.
2 Type a unique name for the unit in the Unit Name field. It can have
up to 12 characters but note that the name is case-sensitive. Do not
include spaces in the unit name.
include spaces in the unit name.
3 Press [Ctrl]+[E] to submit the new setting and then enter
SAVE
Get_con.bk : IPX_ROUT.FRM Page 3 Friday, October 3, 1997 1:49 PM