Cabletron Systems VHSIM-G02 Manual De Usuario

Chapter 2: Installation

5. Refer back to Figure 2-1 and remove the two faceplate mounting 

screws and the VHSIM coverplate. Save the screws.

6. Refer back to Figure 2-2 and place the VHSIM-G02 module behind 

the standalone device faceplate. 

7. Align the VHSIM-G02 connectors with the pins on the standalone 

device.

8. Press down firmly on the VHSIM-G02 until the connectors slide all 

the way onto the pins. Ensure that the standoffs on the standalone 
device align with the standoff screw holes on the VHSIM-G02.

9. Secure the VHSIM-G02 to the device faceplate using the mounting 

screws saved in step 5.

10. Secure the VHSIM-G02 to the device standoffs using the standoff 

screws shipped with the VHSIM-G02.

11. Reattach the chassis cover to the standalone device, reconnect the 

power cord, and reconnect the standalone device to the network.

When inserting the VHSIM-G02 onto the device pins, ensure 
that the pins do not bend, as this can damage both the device 
and the VHSIM-G02.

Ensure that the chassis cover is in place before reconnecting 
the power cord.