Cabletron Systems EMM-E6 Ethernet Manual De Usuario

Table 15-1 provides a step by step procedure for downloading the 
firmware image file. This section provides specific MIB OIDs, their 
names, and the required setting for proper image file download. Refer to 
your specific MIB walking tool documentation for instructions on how to 
set MIB OID strings.

The Download OIDs for Cabletron products reside in Cabletron 
enterprise MIBs (group 52). The specific OIDs necessary to perform an 
image file download reside in the common download group under
ctDL (Cabletron Download). The full OID string to reach this group is:

1.3.6.1.4.1.52.4.1.5.8.1

When performing the steps in Table 15-1, keep the following in mind:

•

You must follow the steps in order.

•

Enter the IP address of the tftp server in standard dotted decimal 

notation (e.g., 132.177.118.24).

•

Enter the FULL path to the image file in the ctDLTFTPRequest OID, 

including the name of the image file (e.g., c:\tftpboot\EMME6.hex).

Table 15-1. Standard Download Procedure

(1).

ctDLForceOnBoot

1.3.6.1.4.1.52.4.1.5.8.1.1.0

integer

1

(2).

ctDLCommitRAMToFlash

1.3.6.1.4.1.52.4.1.5.8.1.2.0

integer

1

(3).

ctDLTFTPRequestHost

1.3.6.1.4.1.52.4.1.5.8.1.4.0

IP 
address

Enter the IP 
address of 
the tftp 
server.

(4).

ctDLTFTPRequest

1.3.6.1.4.1.52.4.1.5.8.1.5.0

string
(ASCII)

Enter the 
path to the 
image file.

(5).

ctDLInitiateColdBoot

1.3.6.1.4.1.52.4.1.5.8.1.3.0

integer

1

CH1Book  Page 7  Wednesday, March 20, 1996  7:48 AM