Cabletron Systems EMM-E6 Ethernet Manual De Usuario

Before installing the EMM-E6 in a live network, test the module in a 
controlled situation to ensure that it is repeating and bridging packets. You 
can perform this test with two workstations (see Figure 3-6), using an 
MMAC-FNB, or MMAC-MFNB, installed with an EMM-E6 and a Media 
Interface Module (MIM) as follows:

1. Install the EMM-E6 and any MIM (e.g., TPMIM, THN-MIM, 

CXRMIM, FORMIM, etc.) into a non-networked MMAC. 

2. Connect the first workstation to an EMM-E6 EPIM or BRIM.

3. Connect the second workstation to the MIM using the appropriate 

cable or transceiver.

4. Assign the EMM-E6 a valid IP address through Local Management.

5. Designate the first workstation as a file server and the second one as 

the client (refer to the workstation manuals for establishing one as a 
file server and one as a client.). 

CH1Book  Page 11  Wednesday, March 20, 1996  7:48 AM