Cabletron Systems EMM-E6 Ethernet Manual De Usuario

To connect a VT Series terminal to a Cabletron module Console port 
(Figure 4-1):

1. Connect the RJ45 connector at one end of the cable to the Console port 

on the Cabletron module.

2. Plug the RJ45 connector at the other end of the cable into the RJ45 to 

DB25 female adapter.

3. Connect the DB25 adapter to the port labeled COMM on the VT 

terminal.

Figure 4-1. Connecting a VT Series Terminal

4. Turn on the terminal and access the Setup Directory. Follow the 

directions in the previous section and set up your VT terminal to match 
the configuration given in Table 4-1.

5. When these parameters are set, the Local Management password 

screen will appear. Refer to Chapter 5, Accessing Local Management.

VT S i

T

i

l

CH1Book  Page 4  Wednesday, March 20, 1996  7:48 AM