Canon 700 Series Manual De Usuario

How the Machine Operates with Default Settings

Other Special F

eatures

ECM Sending/
Receiving

ECM TX
ECM RX

The machine is set to conduct all transactions using 
ECM (Error Correction Mode). If transmission speed 
appears to be extremely slow, you may be able to speed 
up transmission time by turning ECM ‘OFF’. (See “TX 
(Send) Settings,” on p. 11-14, or “RX (Receive) 
Settings,” on p. 11-17.)

Energy Saver

ENERGY SAVER

If the machine remains idle for a specified time period, it 
enters the Energy Saver mode. If your machine is idle 
for three minutes, the machine enters the Energy Saver 
mode. (See Chapter 5, “Summary of Important 
Settings,” in the Reference Guide.)

Language

DISPLAY 
LANGUAGE

The initial display language is English. Spanish, French, 
and Portuguese are also available. (See Chapter 5, 
“Summary of Important Settings,” in the Reference 
Guide.) 

Manual Receiving 
with an Extension 
Telephone

REMOTE RX

To start receiving a fax manually by answering an 
extension telephone connected to the machine, dial 25. 
You can change this number if necessary. (See “RX 
(Receive) Settings,” on p. 11-17.)

Offhook Alarm

OFFHOOK ALARM

If the handset remains off the hook, an alarm sounds. 
The volume of this alarm can be adjusted, or it can be 
turned ‘OFF’. (See “User Settings,” on p. 11-5.)

Pause Length

PAUSE TIME

A pause entered within a number is set for two seconds. 
You can lengthen this pause up to 15 seconds. A pause 
entered at the end of a number is fixed at 10 seconds, 
and cannot be adjusted. (See “TX (Send) Settings,” on 
p. 11-14.)

PIN Codes

PIN CODE

The PIN Code feature is disabled unless you turn it ‘ON’ 
and set up the machine for dialing through a PBX 
(Private Branch Exchange) with PIN codes. (See “TX 
(Send) Settings,” on p. 11-14.)

Printing: Continue 
Printing with Toner 
Supply Low

TONER SUPPLY 
LOW

When the toner supply runs low, the machine saves the 
remainder of the document in memory. You can set the 
machine to continue printing even after the <TONER 
SUPPLY LOW> message appears during printing. (See 
“Printer Settings,” on p. 11-19.)

Printing: Footer on 
Printed Documents

RX PAGE FOOTER

The machine does not print a footer on every document 
received unless you turn this feature ‘ON’. (See “RX 
(Receive) Settings,” on p. 11-17.)

Program One-Touch 
Key

PROG 1-TOUCH 
KEY

If you press the designated one-touch speed dialing key 
under which a function is assigned before you start a 
transmission, the machine automatically performs that 
function. (See “User Settings,” on p. 11-5.)

Receiving Password RX PASSWORD

No receiving password is set until you set one. If the 
other party regularly sends you documents only with an 
ITU-T password and no subaddress, set up an RX 
password. (See “System Settings,” on p. 11-29.)