Canon EOS50DBODY Manual De Usuario

102

By changing the shutter speed or aperture automatically, the camera 
brackets the exposure up to ±2 stops in 1/3-stop increments for three 
successive shots. This is called AEB.

 

Under the [2] tab, select [Expo. 
comp./AEB], then press <0>.

 

Turn the <6> dial to set the AEB 
amount.

 

You can set the exposure compensation 
amount with the <5> dial. If AEB is 
combined with exposure compensation, 
AEB will be applied centering on the 
exposure compensation amount.

 

Press <0> to set the amount.

X

When you exit the menu, <h> and the AEB 
level will be displayed on the LCD panel.

 

Focus and press the shutter button 
completely. The three bracketed shots will 
be taken in this sequence: Standard, 
decreased, and increased exposure.

 

Follow steps 1 and 2 to turn off the AEB amount display.

 

AEB will be canceled automatically when you set the power switch 
to <2> or when the flash is ready to fire.

3

 Auto Exposure Bracketing (AEB)N

AEB amount

 

If the drive mode is set to <u>, you must press the shutter button three 
times. When <o> or <i> is set and you hold down the shutter button 
completely, the three bracketed shots will be taken continuously. Then 
the camera will stop shooting. When <j> or <l> is set, the three 
bracketed shots will be taken after a 10-sec. or 2-sec. delay.

 

Neither flash nor bulb exposures can be used with AEB.

COP

Y