Canon EOS50DBODY Manual De Usuario

104

When bulb is set, the shutter stays open while you hold down the shutter 
button completely, and closes when you let go of the shutter button. This is 
called bulb exposure. Use bulb exposures for night scenes, fireworks, the 
heavens, and other subjects requiring long exposures.

Set the Mode Dial to <a>.

 

While looking at the LCD panel, turn 
the <6> dial to select “buLb.”

 

The next setting after “30" ” is “buLb.”

 

To set the aperture, set the power switch 
to <J>, and turn the <5> dial.

 

While you hold down the shutter 
button, the exposure will continue.

X

The elapsed exposure time (sec.) will be 
indicated on the LCD panel by the same 
indicator used for the shots remaining.

Each time you press the <U> button, 
the LCD panel illumination will turn on or 
off (9). During a bulb exposure, 
pressing the shutter button completely 
will turn off the LCD panel illumination.

Elapsed exposure time

U

 

Since bulb exposures produce more noise than usual, the image might 
look rough or grainy.

 

When [8C.Fn II -1: Long exp. noise reduction] is set to [1: Auto] or 
[2: On], noise generated by the bulb exposure can be reduced (p.176).

 

For bulb exposures, using the Remote Switch RS-80N3 or Timer Remote 
Controller TC-80N3 (both sold separately) is recommended.

COP

Y