Cisco Systems 8861 Manual De Usuario
For cables that terminate outside of the bracket, use the cable-access openings in the bottom of the bracket to
position the power cord and any other cable that does not terminate in the wall behind the bracket. The phone
and wall bracket openings together form circular openings with room for one cable per opening.
position the power cord and any other cable that does not terminate in the wall behind the bracket. The phone
and wall bracket openings together form circular openings with room for one cable per opening.
Step 5
Proceed to
Adjust the Handset Rest, on page 122
.
Remove the Phone and Key Expansion Module from the Non-Lockable Wall Mount
The wall bracket contains two tabs to lock the plate into the phone mounting plate. The following figure shows
the location and shape of the tabs.
the location and shape of the tabs.
To remove the phone and mounting plate from the wall bracket, you must disengage these tabs.
Cisco IP Phone 8811, 8841, 8851, and 8861 Administration Guide for Cisco Unified Communications Manager 10.5
121
Non-Lockable Wall Mount Components for Phone with Key Expansion Module