Samsung SLM3320NDXAA Manual De Usuario

(

●: Supported, Blank: Not supported) 

Printing successfully on envelopes depends upon the quality of the envelopes. 

To print an envelope, place it as shown in the following figure.

•

When selecting envelopes, consider the following factors:

-

Weight: should not exceed 90 g/m

2

 otherwise; jams may occur.

-

Construction: should lie flat with less than 6 mm curl and should not 
contain air.

-

Condition: should not be wrinkled, nicked, nor damaged.

-

Temperature: should resist the heat and pressure of the machine 
during operation.

•

Use only well-constructed envelopes with sharp and well-creased folds.

•

Do not use stamped envelopes.

•

Do not use envelopes with clasps, snaps, windows, coated lining, self-
adhesive seals, or other synthetic materials.

•

Do not use damaged or poorly made envelopes.

•

Be sure the seam at both ends of the envelope extends all the way to the 
corner of the envelope.

 Acceptable

 Unacceptable

•

Envelopes with a peel-off adhesive strip or with more than one flap that 
folds over to seal must use adhesives compatible with the machine’s fusing 
temperature for 0.1 second about 170°C (338 °F). The extra flaps and strips 
might cause wrinkling, creasing, or jams, and may even damage the fuser.

•

For the best print quality, position margins no closer than 15 mm from the 
edges of the envelope.

•

Avoid printing over the area where the envelope’s seams meet.