Samsung SLM3320NDXAA Manual De Usuario

To avoid damaging the machine, use only transparencies designed for use in 

laser printers.

•

Must withstand the machine’s fusing temperature.

•

Place them on a flat surface after removing them from the machine.

•

Do not leave unused transparencies in the paper tray for long. Dust and dirt 
may accumulate on them, resulting in spotty printing.

•

To avoid smudging caused by fingerprints, handle them carefully.

•

To avoid fading, do not expose printed transparencies to prolonged 
sunlight.

•

Ensure that transparencies are not wrinkled, curled, or have any torn edges.

•

Do not use transparencies that separate from the backing sheet.

•

To prevent transparencies from sticking to each other, do not let the printed 
sheets stack up as they are being printed out.

To avoid damaging the machine, use only labels designed for use in laser 

printers.

•

When selecting labels, consider the following factors:

-

Adhesives: Should be stable at your machine’s fusing temperature 
about 170°C (338°F).

-

Arrangement: Only use labels with no exposed backing between them. 
Labels can peel off sheets that have spaces between the labels, causing 
serious jams.

-

Curl: Must lie flat with no more than 13 mm of curl in any direction.

-

Condition: Do not use labels with wrinkles, bubbles, or other 
indications of separation.

•

Make sure that there is no exposed adhesive material between labels. 
Exposed areas can cause labels to peel off during printing, which can cause 
paper jams. Exposed adhesive can also cause damage to machine 
components.