Life Fitness M051-00K32-A086 Prospecto

 2 

M051-00K32-A086

 
 

 
To program TVs with remote control consoles: 

1.  Leave the remote control cable plugged in.  

2.  Plug the C-SAFE cord into the black 8-pin 

connector on the back of the console. 

3.  Place the 9-volt battery in the programmer. 
4.  Plug the other end of the C-SAFE cord into 

the programmer. 

5.  The programmer will give this feedback that 

the updating procedure is taking place: 

a.  The green LED will glow steadily. 
b.  The yellow LED will then glow 

steadily. 

c.  The yellow LED will then begin 

flashing. 

d.  The console software has been 

updated when the green LED begins 
flashing slowly. 

6.  Unplug the C-SAFE cord from the programmer. 
7.  Unplug the C-SAFE cord from the console. 
8.  Verify that the console’s software version matches the software version on the 

programmer. If the console version number is still lower, repeat the procedure.  

 

Coax

Cable

Power

Cable

Tan 10-Pin Connector 

(for remote control)

Black 8-pin C-SAFE connector