SVAT Electronics CLEARVU10 Manual De Usuario

now you can see

1.  Insert the power supply wire into the rear DC 12V port on the DVR
  Insert the power cord into the power supply.

2.  Plug the power cord from power supply into the power outlet.  

We recommend using a surge protected power bar and/or 
Uninterrupted Power Supply (UPS) backup to prevent damage to 
your DVR system. 

3.  The DVR will power on and you will see a startup screen that 

detects and checks the status of hard drives.  

4.   The DVR will begin normal operation and will show the default 

display of all 8 channels.

NOTE: When powered on for the first time, the CLEARVU10 will automatically begin recording if cameras are connected.  The DVR will 

continue to record on this setting until it is manually changed to a different mode.