SVAT Electronics CLEARVU10 Manual De Usuario
18
CLEARVU10
SVAT ELECTRONICS
now you can see
SHUTTING DOWN
With this DVR you have the option to shut down the entire unit and stop the DVR from recording, or to turn off the LCD screen but continue
recording. For security reasons, you must enter your password to power off the system and halt recording. In either of these situations, pressing the
recording. For security reasons, you must enter your password to power off the system and halt recording. In either of these situations, pressing the
button again will turn the DVR or LCD screen back on.
NOTE: Only users with ADMIN permission levels can turn the unit OFF. For more information on permission levels, please refer to MAKING
CHANGES TO THE USER MANAGEMENT MENU, pg.33.
TO POWER OFF THE DVR (RECORDING STOPS)
1. When on the Live Display screen, press and hold the button on the DVR until the password window pops up.
2. You must then log off of the system. Use the Channel Selection buttons (or the number pad on the remote control) to type in your
2. You must then log off of the system. Use the Channel Selection buttons (or the number pad on the remote control) to type in your
password and press the ENTER button. (The default password is “1234”)
3. The DVR will turn off, disabling recording and remote viewing of your cameras.
TO TURN OFF THE LCD SCREEN (RECORDING CONTINUES)
1. Press the button on the DVR.
2. The screen will turn off, but recording will still continue and you will still be able to access the DVR remotely.
2. The screen will turn off, but recording will still continue and you will still be able to access the DVR remotely.
TIP: You can set up a screen saver so the LCD screen turns off after a certain period of inactivity, but will continue recording. You
can also set the screen saver to activate for a specific period of time (for example, at night when you are asleep). For more
information on screen saver settings, please refer to MAKING CHANGES TO THE SCREEN SAVER MENU,pg.33.
can also set the screen saver to activate for a specific period of time (for example, at night when you are asleep). For more
information on screen saver settings, please refer to MAKING CHANGES TO THE SCREEN SAVER MENU,pg.33.
LIVE DISPLAY
Live Display Mode allows you to view your cameras and gives you options of which cameras you want to view, when you want to view them, and
how you want the footage displayed on the screen. This is the default view when you power on the DVR.
how you want the footage displayed on the screen. This is the default view when you power on the DVR.
A status bar at the bottom of the screen shows you the current date and time, as well as the percentage of hard drive space used.
A title for each camera will be shown, and
next to each camera title shows that the camera is continuously recording. For more information on
changing the title for each camera, please see MAKING CHANGES TO THE CAMERA TITLE MENU, pg.35. For more information on different recording
modes, please see RECORDING MODES, pg.22.
modes, please see RECORDING MODES, pg.22.