SVAT Electronics CLEARVU10 Manual De Usuario

now you can see

1.  After saving any desired changes to other 

menus, click the SPOT-OUT title on the left 
hand side of the window.

2.  Click the boxes under each channel number 

as needed.  A checked box means that the 
specific channel will be sent to the 

 

Spot-Out monitor and displayed.  If the 
checkbox is empty, this camera will NOT be 
displayed on the Spot-Out monitor.

3.  When you are satisfied with your settings, 

click APPLY.

NOTE:  The duration of time that the cameras display and whether or not a camera that detects motion will be displayed in full-
 

screen on the Spot-Out monitor will reflect the current settings under the MONITOR and OSD submenus in the MONITOR menu.  

For more information on these settings, see MAKING CHANGES TO THE MONITOR MENU, pg.28.

5.  After saving any desired changes to other 

menus, click the SCREEN SAVER title on the 
left hand side of the window.

6.  To navigate through the SCREEN SAVER 

menu, use the mouse to click the status 
(OFF, ON, etc) of the setting you wish to 
change.  You will see the outline of the 
status turn green.

7.  Use the   buttons to choose the preferred 

setting.

8.  When you have made all the desired changes to the SCREEN SAVER menu, click APPLY.  If you wish to exit without saving changes, click    in 

the top right corner of the window.

9.  After clicking APPLY, click    in the top right corner of the window to exit the DISPLAY menu and return to the GENERAL menu screen.

NOTE: Each of the settings within the Screen Saver menu are described in detail below.