SVAT Electronics CLEARVU10 Manual De Usuario

now you can see

AUTO BRIGHTNESS: Can be set so that the LCD screen turns off after a certain period of inactivity.  Recording will continue during this time.  You 

can set the monitor to turn off after 10, 20, 30, 40, 50 or 60 minutes.  Choosing “OFF” will disable auto brightness, meaning that your 
monitor will constantly remain on unless it is manually shut off.

MAIN DISPLAY OFF:  When set to ON, the DVR will turn and remain off for the duration of time specified in the FROM and TO status box 

underneath.  When set to OFF, the LCD screen will only deactivate in accordance with the AUTO BRIGHTNESS setting, or when the screen is 
turned off manually.

FROM: Only active when the MAIN DISPLAY OFF is set to ON.  This is the start time for the screen saver to be activated.  

TO:  Only active when the MAIN DISPLAY OFF is set to ON.  This is the time for screen saver to deactivate and the LCD monitor to turn back on.

 

TIP:  You can manually turn the LCD monitor on and off by pressing    on the DVR’s button panel. Recording will continue.

The camera menu allows you to make changes 
to the following:  CAMERA TITLE, COLOR 

SETUP, PTZ SETUP, and MOTION SENSOR.  
The CAMERA TITLE menu allows you to 
personalize the on-screen title of each camera 
as well as whether the camera will be displayed 
in covert mode.  The COLOR SETUP menu is 
where you to make specific changes to the 
brightness, contrast, tint, and color of each 
camera individually.  PTZ SETUP configures 
settings for PTZ cameras (not included).  

MOTION SENSOR allows you to set each 
camera’s sensitivity to motion.