SVAT Electronics CLEARVU10 Manual De Usuario

now you can see

1.  Insert your USB drive into the USB port on the  

side of the DVR

2.  Press the SAVE button next to SYSTEM DATA.

3.  A Window that says “Success” will pop up when  

the settings have completed transferring.

1.  Insert your USB drive into the USB port on the  

side of the DVR.

 
2.  Press the LOAD button next to SYSTEM DATA.
 
3.  A Window that says “Success” will pop up when  

the settings have completed transferring.

NOTE:  This menu is used to set up an external remote 

control (not included) to control multiple 

devices with a singular remote.

1.  After saving any desired changes to other menus, 

click the CONTROL DEVICE title on the left hand side 
of the window. 

2.  To navigate through the CONTROL DEVICE menu, 

use the mouse to click the     buttons to choose the 
preferred setting.

 
3.  When you have made all the desired changes to the CONTROL DEVICE menu, click APPLY.  If you wish to exit without saving changes, click     

in the top right corner of the window.

 
4.  After clicking APPLY, click   in the top right corner of the window to exit the DISPLAY menu and return to the GENERAL menu screen.