SVAT Electronics CLEARVU10 Manual De Usuario

now you can see

SMART ALARM:    Can be turned ON or OFF.  This feature sets the DVR to monitor the hard drive to detect any problems or errors that might be 

developing.  If the DVR detects an error, it will sound an alarm. 

CHECK INTERVAL:  Allows you to set a daily schedule for the DVR to enable Smart Disk monitoring.  If the SMART ALARM (above) is set to ON, the 

DVR will scan for errors at the time period indicated.  If any are detected, it will generate an alarm.

1.  After saving any desired changes to  

other menus. Click the ALARM IN title  
on the left hand side of the window.

 
2.  You will see a window open with 8  

alarms listed.  You will also see the  
column for OPERATION, and a column  
for TYPE.

3.  The OPERATION column allows you to  

enable or disable up to 8 alarms.  Use  
the     buttons to enable or disable  
each alarm.

4.  The TYPE column allows you to set whether 

each alarm is N/O (Normally Open) or N/C 
(Normally Closed).  Use N/O in a situation 
(for example) where a door is continuously 
open.  An alarm will occur when the door 
is closed.  N/C should be used in a situation 
(for example) where a door is to remain 
closed.  If the door is opened, an alarm will 
sound.

5.  When you have made all the desired changes to the ALARM IN menu, click APPLY.  If you 

wish to exit without saving changes, click     in the top right corner of the window.

1.  After saving any desired changes to  

 

other menus, click the ALARM OUT title    
on the left hand side of the window.

2.  You will see a screen pop up with the  

 

8 channels listed.  You will see the  

 

choice to have the alarm triggered by  

 

video loss or motion.

NOTE:  The ALARM IN and ALARM OUT menus configure settings for an external alarm device 

(for example, a motion sensor) or an independent alarm which will sound when an event 
is detected.  The setup and activation processes of these devices will very from model to 
model, so please refer to your sensor or alarm’s instruction manual for proper setup.