SVAT Electronics CLEARVU10 Manual De Usuario

now you can see

You will need to enable the ports by locating the port range forwarding screen. With some D-LINK routers the port forwarding screen is located
within the Applications & Games or Filters tab; in others it is located in the Advanced Tools tab.

1.  Open your web browser. Enter the ROUTER IP address in the address bar and press ENTER.
2.  Enter the user name admin. Leave the password blank followed by pressing the OK button

(unless you have set up a user name and password for your router)

3.  Select the Advanced tab. 
4.  Select the Virtual Server tab. 

•  Enable the Virtual server
•  In the Name field type in “DVR”
•  In the Private IP field enter the DVR’s IP

address. 

•  In the Protocol field, select “Both” (This will

enable both TCP and UDP).

•  In the Private port enter the port number you

need to forward. By default this DVR is set to 
port 80. Use port 80 unless you have a reason 
to change the DVR to another port (not 
recommended).

•  In the Public port re-enter the port number

you entered in the private port field (e.g. 80).

•  Under Schedule, select ”Always”.
•  Ensure that the Virtual Server (or forwarding

that is being set-up) is set to ENABLED. 

5.  Repeat all instructions listed in Step 4 (above), 

except enter port 6100 instead of port 80.

6.  When complete, select the “Apply” button located 

at the bottom of the page to save your changes.  

7.  Port forwarding is now complete!