Samsung CLX-6240FX Manual De Usuario

Troubleshooting_ 81

There is a problem on 
the network interface 
card.

Configure your network 
interface card correctly.

T

A toner cartridge has 
almost reached its 
estimated cartridge 
life. 

W Stop X 

Samsung 
does not 
recommend 
using non-
genuine 
Samsung 
toner cartridge 
such as 

refilled or 
remanufactured. 
Samsung cannot 
guarantee non-
genuine Samsung 
toner cartridge's 
quality. Service or 
repair required as a 
result of using non-
genuine Samsung 
toner cartridges will 
not be covered under 
the machine warranty.

You can choose among 
Stop, Continue or 
Black Only as shown on 
the control panel. If you 
select Stop, the printer 
stops printing and you 
cannot print any more 
without changing the 
cartridge. If you select 
Continue, the printer 
keeps printing but the 
printing quality cannot 
be guaranteed. If you 
select Black Only, the 
machine prints the data 
in black only.
Replace the toner 
cartridge for the best 
print quality when this 
message appears. Using 
a cartridge beyond this 
stage can result in 
printing quality issues.  
See page 67.

If the black toner 
cartridge is 
empty, Black 
Only message 
does not appear.

T

A toner cartridge has 
reached its estimated 
cartridge life. The 
printer stops printing.

Estimated 
cartridge life 
means the 
expected or 
estimated 
toner cartridge 
life, which 
indicates the 

average capacity of 
print-outs and is 
designed pursuant to 
ISO/IEC 19798. (See 
Specification on page 
99.) The number of 
pages may be 
affected by operating 
environment, printing 
interval, media type, 
and media size. Some 
amount of toner may 
remain in the cartridge 
even when "Toner 
Exhausted" appears 
and the printer stops 
printing.

Replace the toner 
cartridge. See page 67.

T

Small amount of toner 
is left in the cartridge. 
The estimated 
cartridge life of toner 
is close.

Prepare a new cartridge 
for replacement. You 
may temporarily 
increase the printing 
quality by redistributing 
the toner. (See page 66.) 

Paper has jammed In 
the paper feed area.

This message 
appears when there is 
a change in the 
system setting or 
when you back up a 
data.

Do not turn the power off 
when this message is 
showing. Changes may 
not be saved and datas 
can be lost.