Samsung CLX-6240FX Manual De Usuario

96 _Installing accessories

The numbers you can enter as follows:

7. When you have finished, press Stop/Clear to return to ready mode.

If the problem occurrs when you use or set up the wireless network values, 

take following stops to restore factory default values. Generally, factory 

values of wireless networking are optimized for your printer.
1. Press Menu ( )  until Network appears on the bottom line of the 

display and press OK.

2. Press the left/right arrow until Wireless appears and press OK.
3. Press the left/right arrow until WLAN Default appears and press OK.
4. When  Restore appears on the bottom line of the display, press OK. 

The machine starts restoring the default values.

Installing the hard disk allows the data from your computer to be sent to the 

print queue of the printer hard disk. This decreases the workload of the 

computer. You can also use various print features, such as storing a job in 

the hard disk, proofing a job, and printing private documents.

For order information, see "Accessories" on page 91. Review the 

precautions on page 93.
1. Turn the machine off and unplug all cables from the machine.
2. Release the screws and remove the rear cover.

3. Open the control board cover. Release the screws, then lift up the cover 

slightly and pull the cover to the right. 

4. Align the connector on the hard disk with the connector on the control 

board. Push the hard disk in until it is latched into place

.

5. Fasten the screws supplied with your new hard disk.

6. Replace the control board cover and fasten the cover with the screws.

7. Replace the rear cover and fasten the cover with the screw.

64-bit WEP

10 digits

5 characters

128-bit WEP

26 digits

13 characters